Technical information

PR5 Memory Configuration Examples
SIMM1/2 SIMM3/4 Total
4MB/4MB 8MB
8MB/8MB 16MB
16MB/16MB 32MB
32MB/32MB 64MB
64MB/64MB 128MB
4MB/4MB 4MB/4MB 16MB
8MB/8MB 16MB/16MB 48MB
16MB/16MB 32MB/32MB 96MB
32MB/32MB 4MB/4MB 72MB
DIMM1 DIMM2 Total
8MB 8MB
16MB 16MB
32MB 32MB
8MB 16MB 24MB
16MB 32MB 48MB
32MB 8MB 40MB
32MB 32MB 64MB
SIMM1/2 SIMM3/4 DIMM1 DIMM2 Total
8MB/8MB 8MB/8MB 16MB 48MB
8MB/8MB 16MB 16MB 48MB
8MB/8MB 16MB/16MB 16MB 32MB 96MB
Note: You can use mixed combinations as long as you follow the
guidelines on page 2-27. Note the 2-sided module restriction.
SIMM Banks
You can install memory in bank
SIMM1/2 only, SIMM2/3 only or both
banks. The bank order doesn’t matter.
You must install two modules of the
same size, type and speed in a bank.
You can mix different sizes between
banks in any combination as long as
the total doesn’t exceed 128MB. You
can even install different DRAM types
in between banks (FP or EDO).
DIMM Banks
You can install memory in DIMM1 only,
DIMM2 only or both. The order doesn’t
matter.
You can mix different sizes between
banks in any combination as long as
the total doesn’t exceed 128MB
Mixed SIMMs & DIMMs
You can install memory in any bank
combination, mixing SIMM and DIMM
banks as long as the total doesn’t ex-
ceed 128MB and you observe the limi-
tation regarding 2-sided modules