User Guide

3-12 Chapter 3
OnChip IDE Channel0 / OnChip IDE Channel1:
This item allows you to enable or disable the primary (IDE1) and secondary (IDE2) IDE controller. Select
[Disabled] if you want to add a different hard drive controller.
IDE Prefetch Mode:
Two options are available: Disabled or Enabled. The default setting is Enabled. The onboard IDE drive
interfaces supports IDE prefetching for faster drive accesses. If you install a primary and/or secondary
add-in IDE interface, set this field to Disabled if the interface does not support prefetching.
IDE DMA transfer access:
This item selects the DMA mode for devices connected through IDE channels.
OnChip SATA Controller:
This item enables or disables the on-chip SATA controller.
SATA DMA transfer:
This item selects the DMA mode for devices connected through SATA channels.
 RAID Config:
Click <Enter> key to enter its submenu:
IDE RAID:
This item allows you to enable or disable the IDE RAID function.
 IDE Channel 0/1 Master/Slave RAID, SATA Primary/Secondary Master RAID:
Select the disks that you want to use as RAID disks.
 Back to Integrated Peripherals Setup Menu:
OnChip USB:
Three options are available: Disabled  V1.1+V2.0  V1.1. The default setting is V1.1+V2.0. If you
choose to disable this item, the “USB Keyboard Support” and “USB Mouse Support” items will not be
able to select in Integrated Peripherals menu.
NF8 Series