User Guide

BIOS Setup 3-3
AGP Clock(MHz):
This item allows you to set the AGP clock speed from 66MHz to 100MHz. Due to the AGP specification
limit, the speed you set over its standard clock speed is supported, but not guaranteed.
Voltage Control:
This option allows you to switch between the default and user-defined voltages. Leave this setting to
default unless the current voltage setting cannot be detected or is not correct. The option “User Define”
enables you to select the following voltages manually.
 CPU Core Voltage:
This item selects the CPU core voltage.
 DDR RAM Voltage:
This item selects the voltage for DRAM slot.
 DDR Ref Voltage:
This item selects the reference voltage needed for DRAM slot to increase its conformity.
 Chipset Voltage:
This item selects the Chipset voltage.
 AGP Voltage:
This item selects the voltage for AGP slot.
ATTENTION: A wrong voltage setting may cause the system unstable or even damage the CPU. Please
leave it to default settings unless you are fully aware of its consequences.
User’s Manual