User`s manual

BIOS Setup 3-11
it to 2T Command for system compatibility or to 1T Command for system performance.
Write Recovery Time:
Two options are available: 2T or 3T. The default setting is 3T. This is the period between two write times.
DDR400 tWTR timing control
Two options are available: 1T or 2T. The default setting is 2T. This is the Internal WRITE to READ
command delay time period.
DDR DQS Input Delay:
Two options are available: Auto or Manual. The default setting is Auto. If you set to Manual, then the
next item will be available.
 Input Delay Value:
This item allows you to adjust the data input strobe delay time of memory. You can key in the HEX
number into this section.
DDR DQS Output Delay:
Two options are available: Auto or Manual. The default setting is Auto. If you set to Manual, then the
next item will be available.
 Output Delay Value:
This item allows you to adjust the data output strobe delay time of memory. You can key in the HEX
number into this section.
 Back to Advanced Chipset Features Setup Menu:
AGP & P2P Bridge Control:
Click <Enter> key to enter its submenu:
CPU to AGP Post Write:
Leave this item to its default setting.
User’s Manual