User`s manual

BIOS Setup 3-13
AGP Fast Write:
Two options are available: Disabled  Enabled. The default setting is Disabled. If your AGP adapter can
support this function, then you can choose Enabled. Otherwise, choose Disabled.
AGP Master 1 WS Write:
Two options are available: Disabled  Enabled. The default setting is Disabled. This implements a
single delay when writing to the AGP Bus. When you set it to Enabled, two-wait states are used by the
system, allowing for greater stability.
AGP Master 1 WS Read:
Two options are available: Disabled  Enabled. The default setting is Disabled. This implements a
single delay when reading to the AGP Bus. When you set it to Enabled, two-wait states are used by the
system, allowing for greater stability.
AGP 3.0 Calibration cycle:
Leave this item to its default setting.
AGP Driving Control:
Leave this item to its default setting.
 AGP Driving Value:
Leave this item to its default setting.
 AGP Pad Drive Delay:
Leave this item to its default setting.
 AGP Strob Drive Strength:
Leave this item to its default setting.
 Back to Advanced Chipset Features Setup Menu:
CPU & PCI Bus Control:
Click <Enter> key to enter its submenu:
User’s Manual