User`s manual

Install VIA USB 2.0 Driver D-1
Appendix D. Install VIA USB 2.0 Driver
NOTE: The final release version of the Microsoft USB 2.0 drivers for Windows XP and Windows 2000
are available at the Windows Update Site. The easiest and surest way to use these drivers is to allow
Windows Update to install them automatically. To download and save the new Microsoft USB 2.0 drivers
for Windows XP and Windows 2000, use the Microsoft Update Catalog feature of the Windows Update
Site at http://v4.windowsupdate.microsoft.com/en/default.asp
There is no need to install VIA USB 2.0 driver for the Windows XP operating system with Service Pack 1
already installed.
Before starting to update the driver, you will
have to make your system connected to Internet.
The installation procedures and screen shots in
this section are based on Windows XP operating
system. For those of other OS, please follow its
on-screen instruction.
Insert the Driver & Utility CD into CD-ROM
drive, it should execute the installation program
automatically. If not, double-click the execution
file at the main directory of this CD to enter the
installation menu.
After entering the installation menu, move your
curser to [Driver] tab. Click [VIA USB 2.0
Driver]. The following screen appears.
1. Click [Yes].
(2)
(1)
(3)
2. (1) Click [Personalize Windows Update]. (2)
Check [Display the link to the Windows Update
Catalog under See Also]. (3) Click [Windows
Update Catalog].
3. Click [Find driver updates for hardware
devices].
User’s Manual