User Guide

Quick Installation
A-3
PN1 - There is a specific orientation for pin 10 and pin 11. Connect the two-
threads suspend switch connector of the computer case to correct pins of
connector on the mainboard. You can ignore this connector since most of
computer cases do not support this feature (the mainboard itself supports it).
Pin number Name of the signal or signification
8 Ground
9 Power on/off signal
PN1 - This connector has a specific orientation.
Connect the two-threads Green LED connector
on the mainboard.
Pin number Name of the signal or signification
9 LED’s Cathode
10 LED’s Anode
PN1 - There is no specific orientation
for pin 4 to pin 7. Connect the four-
threads speaker cable to the PN1
connector pins on the mainboard.
Pin number Name of the signal or signification
4 +5VDC
5 Ground
6 Ground
7 Sound Signal
Installing Power ON/OFF switch connector:
Sleep LED connector:
Installing speaker connector: