User Guide

Appendix AA-2
IDE2- Connect one end of the 40-pin
cable that comes with the drive to the CD-ROM connector, and the other end to
the IDE2 pin connector on the mainboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
LPT- Connect the DB-25 pins cable that
comes with the hardware device to the LPT connector on the mainboard.
COM1- Connect the DB-9 pins cable that comes
with the hardware device DB-9 pins to connector
COM1 on the mainboard.
COM2- Connect the other DB-9 pins cable to connector COM2 on the
mainboard.
Watch the pin position and the
orientation
PN2 - There is a specific orientation for pin 1 to pin 5. Insert the five-threads
keylock cable into correct pins of connector on the mainboard.
Pin number Name of the signal or signification
1 +5VDC POWER LED
2 No connection POWER LED
3 Ground POWER LED
4 Keyboard inhibit Signal
5 Ground
Watch the pin position and the
orientation
PN2 - There is a specific orientation for pin 6 and pin 7. Connect the two-
threads IDE LED connector to the connector on mainboard.
Pin number Name of the signal or signification
6 ¡i LED Cathode ¡j
7 ¡i LED Anode ¡j
Installing CD-ROM Drive:
Installing parallel port:
Installing serial port:
Installing Keylock connector:
Installing HDD LED connector: