User Guide

Introduction to BIOS 3-17
Suspend Mode:
When the setting selected for "Power Management" is "User Define", you
can define for this mode any delay from 1 minute to 1 hour. If no power
management event occurs during this time period, meaning the computer is
inactive during this period, the system will enter the Suspend power saving
mode. The CPU stops working completely.
If this mode is disabled, the system will not enter the Suspend mode.
Power Button Override:
Support ACPI Power Button Over-ride. The user presses the power button
for more then four seconds while the system is in the working state, then
the system will transition to the soft-off(Power off by software). This is
called the power button over-ride.
Resume by LAN/Ring:
To connect a external modem with the onboard serial port, the system will
be turned on when telephone ring-up.
Resume by Alarm :
RTC alarm can turn on the system . You can set date ( of month ) and time
( hour , minute , second ) .