User Guide

2-6 Chapter 2
PN1 - Hardware Reset connectors
There is no specific orientation. Connect the two-thread hardware reset cable
to the PN1 connector pins on the mainboard.
Pin number Name or significance of signal
1 Hardware reset signal
2 Ground
PN1 - Sleep LED connector
This connector has a specific orientation. Connect the two-thread Sleep LED
connector cable attached to the case to the Sleep LED connector on the
mainboard.
Pin number Name or significance of signal
9 LED’s Cathode
10 LED’s Anode
FAN1 - CPU Fan power connector
This has a specific orientation. Connect the three-threads CPU fan cable to the
FAN1 connector.
Pin number Name of the signal or signification
1 Control on / off
2 +12V
3 Sensor