Specifications

Quick Installation
A-7
Some jumpers are reserved for future
functions or are not to be adjusted in normal operation. Adjust them according
to the following recommendations.
CCMOS ：Put jumper on pin 1 and pin 2.
JC1 ：OFF (don’t need to use any jumper).
Parameters and CPU settings After you have followed
the steps described above and completed the installation, when you power the
computer on, you will see the following message displayed:
TO ENTER SETUP BEFORE BOOT PRESS CTRL-ALT-ESC OR
DEL KEY
Press immediately Del key to enter BIOS Setup. Select Load Setup Defaults,
than enter CPU Soft Menu to set CPU parameters.
Adjusting other jumpers:
BIOS Setup: