Specifications

3-36 Chapter 3
´ Password Setting
This option allows you to set a password required to start the system
(System) or to access to the BIOS (Setup).
After you have set a password through the PASSWORD SETTING
option, you can enter the Security Option in the “BIOS Features Setup Menu”
to select the security level in order to prevent any unauthorized access.
Password setting procedure:
When you choose the Password setting option, the following
message is displayed:
“Enter Password:“
Type your password. When complete, press <Enter>. The following
message is displayed:
“Confirm Password:“
Type your password again. When complete, press <Enter>. The
password setting is completed.
Password clearing procedure:
When you select the Password setting option, the following message
is displayed:
“Enter Password:“
Press <Enter>, the message “Password Disable” is displayed. Press a
key. The password clearing procedure is completed.
Notice: Do not forget your password. If you forget it, you will have to
open the computer case, clear the contents of the CMOS,
and boot the system up again. But doing this, you must reset
all your settings.