Specifications

Installing the Mainboard 2-5
PN1 - Hardware Suspend switch
There is no specific orientation. Connect the two-thread hardware suspend
plug to the PN1 connector pins on the mainboard. Since most cases do not
support this feature, most of you ignore this instruction. Furthermore, this
feature is not necessary as it is already a part of the mainboard.
Pin number Name or significance of the signal
13 Suspend
14 Ground
PN2 - Hardware Reset connector
There is no specific orientation. Connect the two-thread hardware reset cable
to the PN2 connector pins on the mainboard.
Pin number Name or significance of signal
1 Ground
2 Hardware reset signal
The “Hardware Reset” is used to reset the computer during
operation without turning the computer off and back on.
For example, if you are running an application that stops
responding to the computer, you may press the Reset button
to restart the computer.
PN2 - Speaker connector
There is no specific orientation. Connect the four-thread speaker cable to the
PN2 connector pins on the mainboard.
Pin number Name or significance of signal
4 +5VDC
5 Ground
6 Ground
7 Sound Signal
Computer
knowledge