User`s manual

H-2 Appendix H
Method 2: Define the chassis’s “Power” button
to initiate STR sleep Mode
How to use the STR function:
There are two ways to put your system into STR
mode:
Method 1: Select “Stand by” in the “Turn Off
Computer…” area.
1. Open “Control Panel”, and then enter
“Power Options”.
1. Click “Start” in the Windows Tools Bar,
and then select “Turn Off Computer…”
2. Select “Advanced”, and then set the
“Power Buttons” to “Stand by”.
Click “Stand by”. 2.
Restart your computer to put these settings into
effect. Now you will only need to press the
“Power” button on the front panel of the chassis
when you want to put your computer into STR
sleep mode.
IT7-MAX2