User`s manual

Software Installation 4-9
User’s Manual
4-4. Windows 2000 Installation
Note
If you want to install the Windows 2000 operating system on the hard drive connected to
Hot Rod 100 Pro, please refer to the NT4.0 installation procedure. The following
procedure is used only when you don’t want to install the Windows 2000 operating
system onto the hard drive connected to Hot Rod 100 Pro.
Step 1:
Install the Hot Rod 100 Pro and
reboot the system. Windows will detect the
new hardware automatically.
Click “Next>” to go to the next step.
Step 2:
Choose “Display a list of all the
drivers in a specific location…” and click
“Next >” to go on.
Step 3:
Choose “SCSI and RAID
controllers” and click “Next >” to go on.