User`s manual

MAG
MA
vi
Han
dle all sensitive components at an ESD workstation. If
possible, use anti-static floor pads and workbench pads.
Handle components and boards with care. Don’t touch the
components or contacts on a board. Hold a board by its edges
or by its metal mounting bracket.
Rack-Mount Instructions
Elev
ated Operating Ambient - If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment
may be greater than room ambient. Therefore, consideration should be
given to installing the equipment compatible with the maximum ambient
temperature (Tma) Specified by the manufacturer.
Reduced Air Flow - Installation of the equipment in a rack should be
such that the amount of air flow required for safe operation of the
equipment is not compromised.
Mechanical Loading - Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven
mechanical loading.
Circuit Overloading - Consideration should be given to the connection
of the equipment to the supply circuit and the effect that overloading of
the circuits might have on overcurrent protection and supply writing.
Appropriate consideration of equipment nameplate ratings should be
used when addressing this concern.
Reliable Earthing - Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit (e.g. use
of power strips).
中国总代理 长沙鹏翔
全国服务热线:4006-010-842
长沙鹏翔电子科技有限公司
地址:长沙高新区文轩路27号麓谷企业广场A4栋507
网址:http://www.ndttech.net