User`s manual

MAG
MA
34
8. After 5-6 secon
ds the LED will stop flashing and turn off
completely.
Remove the card and replace it with a new one, then press the
button again.
Remove
and
replace the
respective
PCIe card
Ideally the PCIe
card that was removed from the system will be
replaced with an identical, working card. Replacing that card with
one that has a different function or purpose may cause the system
to crash due to a mismatch in the resources pre-allocated by the
operating system.
9. The LED should start flashing again.
If power should not be applied to this slot, immediately
press the button again and the LED will stop flashing and
remain off, otherwise go to step 11.
10. After 5-6 seconds the LED will stop flashing and remain on.
After a brief period the new device will be recognized by
the system, and it should be added to the list in the
“Safely Remove Hardware” dialog
中国总代理 长沙鹏翔
全国服务热线：4006-010-842
长沙鹏翔电子科技有限公司
地址：长沙高新区文轩路27号麓谷企业广场A4栋507
网址：http://www.ndttech.net