User`s manual

MAG
MA
30
System Should Be Up and Running
As noted
previously, apply power to the Magma expansion chassis first,
then power up the computer.
Use the procedures detailed in Chapter 3
to confirm
proper card
installation(s). When everything is functioning correctly, your Windows
Device Manager should look something like this for any given slot:
If yo
u discover that any of your 3
rd
Party
PCIe cards contains a
(exclamati
on mark) you have a problem with that card.
Refer to Chapter 5 Troubleshooting for further guidance.
Finishing Touches
Once your system is working properly, replace the host computer and
the expansion chassis covers.
Last, if you previously installed the rack-mounting brackets, simply slide
and secure the chassis in its place within the rack cabinet.
It is advisable for the chassis to be turned off while docking it into the
rack cabinet. If it cannot be turned off, pay special attention to the iPass
and power cable management prior to plugging them into the chassis.
中国总代理 长沙鹏翔
全国服务热线：4006-010-842
长沙鹏翔电子科技有限公司
地址：长沙高新区文轩路27号麓谷企业广场A4栋507
网址：http://www.ndttech.net