User`s manual

MAG
MA
11
Applying Power Correctly
Starting Up:
It is recommended that you apply power to the Magma expansion
chassis prior to powering up your computer. This will allow the PCIe bus
hierarchy to be in a stable state when the host system issues its master
power-on bus reset. This will also allow the software driver to recognize
the PCI bus hierarchy and any attached devices.
The system’s On/Off switch is located on the front panel, as well as an
LED indicator to indicate power status. Verify that the green power
indicator is ON after pressing the button.
Wind
ows Start Up
As y
our Windows computer starts
up, you will see a small message
box pop-up in the lower-right corner
of the screen to alert you that
Windows has found new hardware.
The system does not require any Magma drivers in order to operate
properly with the x8 PCIe Host card
. How
ever, it may require a driver in
order to work with the optional ExpressCard host, hence we added the
next section.
You may now proceed to Chapter 3 Verify Installation
.
M
A
C Start Up
Apple MAC OS computers will boot up without any visible indicators that
the Expansion System is connected. Go to: Chapter 3 Verify Installation.
中国总代理 长沙鹏翔
全国服务热线：4006-010-842
长沙鹏翔电子科技有限公司
地址：长沙高新区文轩路27号麓谷企业广场A4栋507
网址：http://www.ndttech.net