User manual

Set-up dialogs
The car set-up dialogs are created based on the car you have just built or selected. Spec chassis have very
limited set-up options and use just one dialog for all the chassis settings, full option chassis can have 3 or 4
separate set-up dialogs for the chassis alone. There are separate dialogs for aerodynamics, electrics and
engines.
Understanding the Set-up dialog
Each set-up dialog has a number of set-up options which can be adjusted. They can be adjusted with a slider or
selected from a drop-down list, for example springs and oil.
Set-up options which are not active on the chassis or component that is used in your car, are visible but grayed
out as they are not adjustable.
When you have made changes to your set-up you must click on the Apply button to activate the change. The
changed value will now be part of the car set up of your current car.
Set-ups remain active also after aborting VRC Pro and starting again. VRC Pro will always load the last used car
and set-up exactly as you left it the last time. You should save your complete car set-up before you change
your car to another car, else you will lose your set-up.
You can also restore the default set-up values for that particular section by clicking on the blue Restore button.
Clicking on the orange Cancel button will skip all the changes made in that particular set-up dialog.
Setup sheet
Each car has a special setup dialog called Setup sheet. In this dialog all the adjustable set-up parameters are
available and can be adjusted here, as well as an overview of the used components. The main purpose of the
setup sheet is to make a screen print of it and to post the image in your Tips & Knowledge section on your
profile page if you want to share it with other members. They can study your setup sheet and adjust their own
car exactly the same, even if they have built their car with components of different brands.
Sharing setup files
Saved set-up files are stored in the CarSetup folder in the My Documents\Virtual RC Pro folder. They can only
be used by other members if they own all the components that are used in that setup, else the setup file is
rejected.
Assistance tips
Tips are displayed with certain set-up parameters. These tips help you to make your adjustments in a more
educated fashion. More tips and assistance are available on the VRC World website.