User manual

Delete:
When Load car or Save car is used you can delete a previously saved car. Click on the list Saved Setups the car
setup you want to delete, the Delete button then becomes active and the selected setup can be removed from
your system.
Car display area:
While you are building your car or changing components the car is being displayed in the right section of the
screen. At any stage of building the car you can right click on the car to bring it towards you and view it in 3D.
Hold the right button pressed while moving the mouse will spin the car around. Left click on the area to place
the car back again. The body can be viewed in the same way.
Car setup area:
When you have completed the car or have a pre-built car you can then work on the setup of the various
sections of the car. There are 2 ways of going to the set up section:
 by going over the chassis
 by clicking on the Set up buttons at the bottom of the screen
Move your mouse over the car and body and select the section you want to change the setup of. Clicking on
the section or button will open the selected setup dialog. The Set up dialogs are described in a separate
section of these instructions.