User manual

PIT TABLE INTERFACE
When VRC PRO has loaded successfully you arrive at your pit table at the RC Speedway track. In front of you
there is your first car, the Intercept ER10 Spec 1:10 scale electric sedan racer. This car and the RC Speedway
are the default car and track. Any time you have a problem and would lose your settings and have to restart
the game, the default track and car will be loaded.
Navigation:
There are 2 ways of navigation. You can left-click on top and bottom menu bars. You can also left-click on
certain 3D objects to trigger the same action:
Stopwatch: go to Time Trial
Mobile phone: go to Multiplayer
Chassis: go to Workbench (build car and set-up)
Component: go to Component section
Accessory: go to Accessory selection
3D object manipulation:
You can right click on most of the objects on your pit table, including the laptop screen, catalogs, folders etc.
The object will then be lifted off the table and zoomed in on, and you can spin the object by holding the right
mouse button pressed, and moving the mouse. By pressing the Shift key at the same time you change the
spinning axis which can sometimes be useful.
Some objects are fixed, like the laptop screen and decals, and can therefore not be spun.
Several objects are linked to a website. Clicking on the blue More info button at the top will open a browser
and show the product page of that object. When playing in windowed mode the new browser will open
immediately. When playing in full screen mode the game will first go back to windowed mode, this will take
some time.
With Escape or with a left-click the object returns to its position.
Objects on your pit table
There are 4 type of 3D objects on your pit table:
- fixed objects
- components
- accessories
- commercials
Fixed objects:
Objects like the pit table itself and the laptop are fixed and can’t be manipulated.