User`s manual

4-14 Chapter 4
 Serial ATA Port1 Mode / Serial ATA Port2 Mode:
This item determines the function mode for Serial ATA Port 1 (i.e. The SATA1
connector in this model) and Serial ATA Port 2 (i.e. The SATA2 connector in this
model). Both SATA1 and SATA2 will be served each as one single IDE connector
after selected as the following modes:
Mode
Serial ATA
Port 1
(SATA1)
Serial ATA
Port 2 (SATA2)
Description
IDE-3 Master IDE-4 Master
• SATA1 serves as IDE-3 Master
• SATA2 serves as IDE-4 Master
• OnChip IDE-1 and IDE-2
controller enabled
Enhanced
IDE-4 Master IDE-3 Master
• SATA1 serves as IDE-4 Master
• SATA2 serves as IDE-3 Master
• OnChip IDE-1 and IDE-2
controller enabled
IDE-1 Master
IDE-1 Slave
• SATA1 serves as IDE-1 Master
• SATA2 serves as IDE-1 Slave
• OnChip IDE-1 controller disabled
IDE-1 Slave IDE-1 Master
• SATA1 serves as IDE-1 Slave
• SATA2 serves as IDE-1 Master
• OnChip IDE-1 controller disabled
IDE-2 Master
IDE-2 Slave
• SATA1 serves as IDE-2 Master
• SATA2 serves as IDE-2 Slave
• OnChip IDE-2 controller disabled
Combined
IDE-2 Slave IDE-2 Master
• SATA1 serves as IDE-2 Slave
• SATA2 serves as IDE-2 Master
• OnChip IDE-2 controller disabled
S-ATA IDE1 S-ATA IDE2
• SATA1 serves as IDE-1 Master
• SATA2 serves as IDE-2 Master
• OnChip IDE-1 and IDE-2
controller disabled SATA
Only
S-ATA IDE2 S-ATA IDE1
• SATA1 serves as IDE-2 Master
• SATA2 serves as IDE-1 Master
• OnChip IDE-1 and IDE-2
controller disabled
AB-2003 DigiDice