User Guide

F-2 Appendix F
2
Example 2: With a system including the mainboard (with CPU, DRAM, COAST...)
HDD, CD-ROM, FDD, VGA CARD, LAN CARD, MPEG CARD, SCSI
CARD, SOUND CARD, after assembly and after having installed the Sound
Card Driver, when you restart the system, when it runs the Sound Card
Driver, it resets automatically. This problem may be due to the Sound Card
Driver. During the Starting DOS… procedure, press SHIFT (BY-PASS) key,
to skip CONFIG.SYS and AUTOEXEC.BAT; edit CONFIG.SYS with a
text editor, and in front on the line that loads the Sound Card Driver, add a
remark REM, in order to disable the Sound Card Driver. See the example
below.
CONFIG.SYS:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE HIGHSCAN
DOS=HIGH,UMB
FILES=40
BUFFERS=36
REM DEVICEHIGH=C:\PLUGPLAY\DWCFGMG.SYS
LASTDRIVE=Z
Restart the system. If the system starts and does not reset, you can be sure
that the problem is due to the Sound Card Driver. Note down the Sound
Card model, mainboard model, BIOS identification number on the technical
support file (refer to main instructions), and describe the problem in the
space provided.
JJJ