User`s manual

I-2 Appendix I
% ACPI System Button
Method 2: Define the case “Power”
button to initiate STR sleep Mode
% Advance Configuration and Power
Interface (ACPI) BIOS
% SCI IRQ use by ACPI bus
% System board extension for ACPI BIOS
After these items show up, you can go to
the next step for the STR function setting.
How to use the STR function:
There are two ways to put your system
into STR mode:
Method 1: Select “Stand by” in the “Shut
Down Windows” area.
1. Open “Control Panel”, and then enter
“Power Management”.
1. Click “Start” in the Windows Tools Bar,
and then select “Shut Down…”
2. Select “Advanced”, and then set the
“Power Buttons” to “Standby”.
Restart your computer to put these settings
into effect. Now you will only need to
press the “Power” button on the front
panel of the chassis when you want to put
your computer into STR sleep mode.
Select “Stand by”, and then click “OK”. 2.
BG-71