User`s manual

BIOS Setup 4-17
4-6. Power Management Setup Menu
This menu sets up the power management in order to reduce power consumption.
Figure 4-8. Power Management Setup Menu
ACPI Suspend Type
This item specifies the power saving mode for ACPI (Advanced Configuration and Power
Interface). The options are: S1(POS), S3(STR), and Auto.
• S1 (POS): Enables the function of Power On Suspend.
• S3 (STR): Enables the function of Suspend to RAM.
Run VGABIOS if S3 Resume:
This item decides to run the VGABIOS or not if the S3 status resumes.
USB Dev Wake-Up From S3
This item allows you to use a USB device to wake up a system that is in the S3 (STR) state.
Modem Use IRQ:
You can specify the IRQ for modem use. Eight options are available: NA $ 3 $ 4 $ 5 $ 7
$ 9 $ 10 $ 11. The default setting is NA.
Soft-Off by PBTN
Two options are available: Instant-off and Delay 4 Sec.. The default setting is Instant-off.
Pressing the power button for more than four seconds forces the system to enter the Soft-Off
state when the system has “hung”.
User’s Manual