User Guide

2-10 Chapter2
BF6
JP1 Header: Disable or Enable Keyboard/Mouse Wake Up
This header is used to Disable or Enable
keyboard/mouse wake up function. This
function has to cooperate with the BIOS
setting (see section 3-5).
Short pin 1-2 Disable keyboard/mouse
Wake Up
Short pin 2-3 Enable keyboard/mouse
Wake Up (default)
JP2 Header: Disable or Enable Power Recovery
This header is used to Disable or Enable
power recovery function. This function has
to cooperate with the BIOS setting (see
section 3-5).
Short pin 1-2 Disable power recovery
Short pin 2-3 Enable power recovery
(default)
NOTE
If you enable the power recovery function and connect a ZIP device to the LPT port, you
have to turn off the power of your ZIP device after you shutdown your computer.
Otherwise, the onboard battery will run down.
CCMOS: CMOS Discharge Jumper
Jumper CCMOS discharge CMOS memory.
When you install the motherboard, make
sure this jumper is set for normal operation
(pin 1 and 2 shorted). See figure 2-6.