User Guide

Installing the driver for Ultra ATA/66 D-7
User’s Manual
NOTE
If you have a
SCSI CDROM
, you have to set the “Boot Sequence" as “EXT,C,A" and
the "Boot Sequence EXT Means" as "SCSI" in the "BIOS Features Setup"
Step 3:
Insert the Windows NT installation
CD (must be bootable) into your CD-ROM.
Press the “F6” key immediately when the
message “Setup is inspecting your
computer’s hardware configuration…”
appears.
Step 4:
Press “S” to specify an additional
device (Ultra ATA/66 IDE controller)
Step 5:
Press “ENTER” to select “Others”
Step 6:
Insert the Ultra ATA/66 Driver
diskette into drive A, and press “ENTER”.