User`s manual

Hardware Setup 2-17
(15). Serial ATA Connectors
These connectors are provided to attach one Serial ATA device at each channel via Serial ATA cable.
NOTE: The connectors [SATA1] and [SATA2] provide “RAID 0” or “RAID 1” service besides their
regular SATA connection. For models “AX8-3
rd
Eye” and “AX8”, additional “RAID 0+1” and “JBOD”
services are provided further.
(16). Status Indicators
• LED1 (5VSB): This LED lights up when the power supply is connected with power source.
• LED2 (VCC): This LED lights up when the system power is on.
User’s Manual