Specifications

Installing the Mainboard 2-7
FAN1 - CPU Fan power connector (TX5)
This has a specific orientation. Connect the three-threads CPU fan cable to the
FAN1 connector.
If, at the bottom of the fan, there are only two threads, just connect them to
PIN2 and PIN3.
Pin number Name of the signal or signification
1 Sensor signal
2 +12V
3 Control on/off
IR - Infrared remote Connectors Watch the pin number and the orientation
This has a specific orientation. Your mainboard supports this feature, but you
must buy the infrared remote device as an option.
(AX5) :
Pin number Name of the signal or signification
1 +5VDC
2 No connection
3 Transmit data
4 Ground
5 Receive data
(PX5 TX5) :
Pin number Name of the signal or signification
1 +5VDC
2 No connection
3 Receive data
4 Ground
5 Transmit data