User Guide

Hardware Setup 2-9
5. Locate the DMS-59! to interconnect
cable in the package.
6. There are 3 connectors on the DMS-59!
interconnect cable as shown in above
illustration. Connector 1 is a DMS-59! Male
connector; Connector 2 is a DVI-I Female
connector; Connector 3 is a DVI-I Male
connector.
7. Connect the DMS-59! Male connector on
the cable to the DMS-59! connector on the
CrossFire! Edition graphics card.
8. Connect the DVI-I Male connector on the
cable to the DVI-I connector on the CrossFire!
compatible PCI Express graphics card. Then
connect the DVI-I Female connector on the
cable to your monitor.
User’s Manual