User`s manual

BIOS Setup 3-21
# RAID Config:
Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
RAID Config
- RAID Enable Enabled Item Help
X - IDE Primary Master RAID Disabled
X - IDE Primary Slave RAID Disabled
X - IDE Secondary Master RAID Disabled
X - IDE Secondary Slave RAID Disabled
X - SATA 1 Primary Master RAID Disabled
X - SATA 1 Secondary Master RAID Disabled
X - SATA 2 Primary Master RAID Disabled
X - SATA 2 Secondary Master RAID Disabled
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
RAID Enable:
This item allows you to enable or disable the IDE RAID function.
! IDE Primary/Secondary Master/Slave RAID, SATA 1/2 Primary/Secondary Master RAID:
Select the disks that you want to use as RAID disks.
# Back to Integrated Peripherals Setup Menu:
USB Park Mode:
This item enables or disables the USB Park Mode. Leave this item to its default setting.
USB TD Reads:
This item selects the mode for the USB TD Reads. Leave this item to its default setting.
USB Periodic Data Reads:
This item selects the mode for the USB Periodic Data Reads. Leave this item to its default setting.
USB Asyn Data Reads:
This item selects the mode for the USB Asyn Data Reads. Leave this item to its default setting.
Onboard FDC Controller:
Two options are available: Enabled and Disabled. The default setting is Enabled. You can enable or
disable the onboard FDC controller.
User’s Manual