User`s manual

BIOS Setup 3-13

[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port address.

[3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port address.

 Parallel Port Mode:

This item specifies the parallel port mode.

[SPP]: (Standard Parallel Port) Allows bi-directional parallel port operation at normal speed.

[EPP]: (Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed.

[ECP]: (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed faster than

the normal mode’s data transfer rate.

[ECP+EPP]: Allows parallel port operation at ECP and EPP mode.

[Normal]: Allows the standard parallel port mode to be used.

 EPP Mode Select:

This item selects the EPP mode.

 ECP Mode Use DMA:

This item selects the DMA channel of the parallel port.

 Back to Integrated Peripherals Setup Menu:

Init Display First:

This item selects to initialize AGP or PCI Slot first when the system boots.

[PCI Slot]: When the system boots, it will first initialize PCI.

[AGP]: When the system boots, it will first initialize AGP.

User’s Manual