User Guide

BIOS Setup
AB9 Pro, AB9 3-21
[RAID]: The onboard Serial ATA served as RAID mode.
JMB363 SATA Controller
This item enables or disables the Onboard SATA controller for SATA8, SATA9 and IDE1 port.
Onboard 1394 Controller
This item enables or disables the IEEE 1394 controller.
 Back to Integrated Peripherals Setup Menu
Onboard FDC Controller
This option enables or disables the floppy disk controller.
3.6 Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type S3(Suspend-To-RAM) Item Help
- Resume by USB from S3 Enabled
Power Button Function Instant-Off
Wake Up by PME# of PCI Disabled
Wake Up by Onboard LAN1 Disabled
Wake Up by Onboard LAN2 Disabled
Resume by Alarm Disabled
X
- Date(of month) Alarm 0
X
- Time(hh:mm:ss) Alarm 0 : 0 : 0
POWER ON Function BUTTON ONLY
X - KB Power ON Password Enter
X - Hot Key Power ON Ctrl-F1
Restore On AC Power Loss Power Off

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type
This item selects the type of Suspend mode.
[S1(PowerOn Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
- Resume by USB from S3
When set to [Enabled], this item allows you to use a USB device to wake up a system that is in
the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI
Suspend Type” is set to [S3(STR)].