User`s manual

2-4 Chapter 2
2-3. Install System Memory
This motherboard provides four 240-pin DDR2 DIMM slots for Dual Channel DDR 533/400 memory
modules with memory expansion size up to 4GB.
To reach the performance of Dual Channel DDR, the following rules must be obeyed:
• When installing TWO DIMM modules: Install DIMM modules of the same type and size for
slots [DIMM1]+[DIMM3] or slots [DIMM2]+[DIMM4].
• When installing FOUR DIMM modules: Install DIMM modules of the same type and size for
slots [DIMM1]+[DIMM3], and slots [DIMM2]+[DIMM4].
Bank Memory Module Total Memory
Bank 0, 1 (DIMM1) 256MB, 512MB, 1GB 256MB ~ 1GB
Bank 2, 3 (DIMM2) 256MB, 512MB, 1GB 256MB ~ 1GB
Bank 4, 5 (DIMM3) 256MB, 512MB, 1GB 256MB ~ 1GB
Bank 6, 7 (DIMM4) 256MB, 512MB, 1GB 256MB ~ 1GB
Total System Memory 256MB ~ 4GB
NOTE: Usually there is no hardware or BIOS setup require after adding or removing memory modules,
but you will have to clear the CMOS memory first if any memory module related problem occurs.
AA8-DuraMAX