Specifications

3Dlabs Tested Motherboards
This is a list of motherboards that have been specifically reviewed and tested by 3Dlabs for physical space and
functionality with the 3Dlabs Wildcat Realizm 800 graphics card. Note that testing is on an “open” motherboard
and does not take into account any additional requirements of the system/chassis in which the motherboard
may be installed. Motherboards with a similar form factor are likely to be compatible with the Wildcat Realizm
800, but you must first insure the motherboard meets all the requirements listed in this document. Please check
http://www.3dlabs.com/support/ or email [e-mail] for the most up to date information.
Motherboard
Make
Motherboard
Model
Chipset Status Notes
ASUS NCD-D Intel E7525 Pass
ASUS P5GD1 Intel 915P Pass
ASUS P5AD2 Intel 925X Pass
ASUS A8N-SLI nForce Under Review
Dual card not supported
ABIT AA7-Max Intel i925X Pass
ABIT AA8-DuraMAX Intel i925X Pass
ABIT AA8-XE Intel i925X Pass
Gigabyte GA-9ITDW Intel E7525 Pass
Gigabyte GA-81AX Intel 925X Pass
Intel SE2575GP2 Intel E7525 Pass
Must have T61_ww34 system BIOS
(or later)
Intel D915GEV Intel 915G Pass Conditional
Slight jumper clash. Must have
EV91510A.86A.0260 system BIOS
(or later)
Intel D915GUX Intel 915G Pass
Must have EV91510A.86A.0260
system BIOS (or later).
Intel D925XCV Intel 925X Pass
Must have EV92510A.86A.0338
system BIOS (or later).
Supermicro X6DA8 Intel E7525 Pass Conditional
Must use IDE and floppy cables with
low profile connectors. The one IDE
cable supplied is OK, floppy cable is
not.
Supermicro X6DAE Intel E7525 Pass Conditional
Must use IDE and floppy cables with
low profile connectors. The one IDE
cable supplied is OK, floppy cable is
not.
Tyan i7525 (S2676) Intel E7525 Pass
Tyan K8WE (S2895) nForce Under Review
Dual card not supported
3Dlabs
6