User Guide

Set up
Display
Tray
Capsule holder
AC adapter
AC voltage
switch
Power
button
Computer
connection
Handheld
scanner
connection
Ethernet
connection
• Plug the power supply (AC adaptor plug) to the device and the power cable into the wall socket.
• When turning on the abioSCOPE
®
for the first time, switch on the AC voltage switch “ - ”.
• Then turn on the abioSCOPE
®
by pressing on the “power button”.
Caution
Refer to the abioSCOPE
®
User Manual and IVD CAPSULE product insert for complete instructions.
The tray is a moving part. Be careful not to trap your fingers when the tray is moving.
Do not spill liquid on the tray or tray cover. In case this should happen, clean it with a
disinfectant and dry it before using the device again.
Do not use the abioSCOPE
®
without the device housing due to harmful light intensity
causing permanent eye injury.
Set up the abioSCOPE
®
diagnostic system
1
abio_MKT_023_2021_07_EN_V1.0