abioSCOPE® Quick Start Guide
Set up Set up the abioSCOPE® diagnostic system • Plug the power supply (AC adaptor plug) to the device and the power cable into the wall socket. • When turning on the abioSCOPE® for the first time, switch on the AC voltage switch “ - ”. • Then turn on the abioSCOPE® by pressing on the “power button”.
First Launch Configure administrator account Follow the step-by-step instructions shown on the screen. 1 3 AUTHORISATION Enter user credentials User ID Admin Password q w a e z x t r d s f c y vv i u h g b n p o j k m l , . &123 continue When turning on the abioSCOPE® for the first time, a splash screen will be displayed while the device starts up. Enter the credentials (user ID and password if applicable).
Perfom a Test Follow the step-by-step instructions shown on the screen. Before performing the test, refer to the abioSCOPE® user manual and the IVD CAPSULE product insert for the complete test procedure and additional information. 1 Touch the button “measure”. 10:26 2021-06-28 4 12 : 30 2021-06-28 patient data insert capsule measurement results remove capsule The test is processing. Measuring Name: ABDIN ALBINA The tray opens automatically.
Access the Archived Tests Follow the step-by-step instructions shown on the screen. After performing a test, all test results are stored on the abioSCOPE®. They can be accessed as follows: 1 10:26 2021-06-28 On the main menu screen touch the button “archive”. 4 12 : 30 2021-06-28 To return to the results list press “back”.
Logo The abioSCOPE® and the IVD CAPSULE are CE marked. Abionic SA Route de la Corniche 5 1066 Epalinges Switzerland www.abionic.com abio_MKT_023_2021_07_EN_V1.
