Quick Guide

Adding Photo Paper
Push the top cover to the rear and
then lift to remove it from the printer.
√
NOTE: Do not remove the top cover
while the printer is charging or
printing.
Remove the photo paper from its
packet and insert it into the paper
compartment so that the glossy
side of the white photo paper faces
up and the text side of the Smart
sheet blue card is face down at the
bottom of the stack.
S
m
a
S
h
Connecting to the Printer
1. Download and install the “Printo”
app.
2. Enable Bluetooth on your mobile
device.
3. Press and hold the power button
3 seconds to power on the printer.
3”
4. Launch the “Printo” app and tap
Connect to Printer.
5. Select Next when prompted to
turn on Bluetooth.
√
NOTE: Please only insert one pack of
photo paper (10 sheets + 1 blue card)
at a time.
Reinstall the top cover.
√
NOTE: The Smart sheet blue card is
used for color correction and to clean
the printing mechanism. It will be fed
out of the printer during your initial
print.
√
NOTE: Select Re-Scan if you do not
see your printer listed.
6. Select the printer (“Printo
XXXXXX”) in the pop-up window.
7. When prompted, press and hold
the power button for 1 second to
confirm the pairing.
1”
8. Once your mobile device and
printer is connected you will see
a message indicating connection
and the status LED will light up
green.