AMPAK WSDB-686GN Hardware & Software Setup Guide Rev. 0.2 AMPAK Technology Inc. Doc. NO: www.ampak.com.
1. WLAN Function Quick Start Guide Physical hardware configuration likes as figure1. Please follow the following procedure step by step to get starting WLAN function. SDIO Board Software setup: Follow driver installation procedure steps to install the GB9662 driver on your PC (OS: XP). 1-1.Copy WDSB-686GN\WSDB-686GN_Driver_V1.2_10122012\Nvram\GB9662_NVRAM_V1.1_09132 012.TXT to C:\Windows\system32\Drivers 1-2. Copy Test Board Socket WDSB-686GN\WSDB-686GN_Driver_V1.2_10122012\5_90_153_49_43362_mfg_A2(Dr
1-4.Choose No, not now, and then click Next. 1-5.Choose install from a list or specific location (Advanced), and then click Next. AMPAK Technology Inc. Doc. NO: www.ampak.com.
1-6.Choose Don’t search, I will choose driver to install, and then click Next. 1-7.Click Have Disk . AMPAK Technology Inc. Doc. NO: www.ampak.com.
1-8.Click Browse to choose correct directory of Driver WDSB-686GN\WSDB-686GN_Driver_V1.2_10122012\5_90_153_49_43362_m fg_A2(Driver) \bcmsddhd.inf and then click OK to next step. 1-9.Choose Broadcom 802.11g Network Adapter and click Next to install driver. AMPAK Technology Inc. Doc. NO: www.ampak.com.
1-10.Click Finish and you can check the device is working fine in Device Manager. 1-11.In Device Manager, Choose Broadcom 802.11g Network Adapter right button of mouse and then choose content. AMPAK Technology Inc. Doc. NO: www.ampak.com.
1-12.In the tab of Advanced, choose 1-13.In the tab of Advanced, choose 43362ROMImagePatch item and replace with \SystemRoot\system32\drivers\ GB9662_NVRAM_V1.1_09132012.TXT and then click OK button. AMPAK Technology Inc. Doc. NO: www.ampak.com.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. AMPAK Technology Inc. Doc. NO: www.ampak.com.
