User manual

Setting the ActionVoice -2A to use the Ability Speaker
Note: The Ability Speaker is for use with Auditory Scanning. Please refer to the
ActionVoice instruction manual for information on programming and recording/playing
prompts and messages while in Auditory Mode.
Here is a quick summary diagram of setup modes used with the Ability Speaker:
ActionVoice
Ability
Scanning
Input
Auditory
Mode
Keypad
Input
Option 2
Use the following steps to set up the AbilitySpeaker system:
STEP 1: First, enter Setup Mode by pressing and HOLDING the “Record/Setup” key
on the ActionVoice for at least 2 seconds. (The Setup light on the key will light steadily
when you are in setup mode.)
Ability Speaker Instructions 5