AbilitySpeaker ™ Private Speaker System User Manual and Instructions Ability Research, Inc.
What is the AbilitySpeaker? The AbilitySpeaker system allows auditory scanning users to hear “prompts” on a private pillow speaker and play the messages publicly on a separate loudspeaker. The system includes both the pillow speaker and the separate loudspeaker. It is intended to be used with the ActionVoice-2A (model ACTV-2A). NOTEWhen the AbilitySpeaker is connected to the ActionVoice, the ActionVoice’s built-in speaker is disabled.
NOTE Be Sure to read and save this intruction booklet. Connecting the AbilitySpeaker to the ActionVoice-2A ****** IMPORTANT ***** NOTEThe AbilitySpeaker MUST BE USED WITH an ActionVoice-2A (Model number ACTV-2A). The label on the bottom of the ActionVoice shows the model number. If you have any other model or if you are not sure, contact Ability Research for more information or about having your unit upgraded to that model.
Figure 1.
4 Ability Speaker Instructions
Setting the ActionVoice -2A to use the Ability Speaker Note: The Ability Speaker is for use with Auditory Scanning. Please refer to the ActionVoice instruction manual for information on programming and recording/playing prompts and messages while in Auditory Mode.
STEP 2: Set Option 2. Make sure Scanning and Auditory Mode are also set. (When Auditory Mode is set, messages and prompts will play through BOTH the pillow speaker and the AbilitySpeaker, while ONLY messages will play through the AbilitySpeaker.) STEP 3: To get out of setup mode, press the “Record/Setup” key again. AbilitySpeaker system is now ready for use. The Refer to the ActionVoice manual for more details on programming and setup mode.
intended that the speaker be placed near enough to the user’s ear to easily hear prompts while keeping the volume level low enough to avoid others hearing or being distracted by the prompts. NOTEOutput 2 functions for the ActionVoice are not available when the AbilitySpeaker is plugged in and Option 2 is enabled.
Location and Mounting of the AbilitySpeaker and Pillow Speaker The pillow speaker should be located conveniently for the user to hear quitely played prompts. It should be mounted (using velcro™ or a similar product) to the back of the enclosure rather than using the cord to suspend it. It should be located so as to avoid being bumped by the user, headgear, supports, etc. The AbilitySpeaker enclosure should be located so that listeners can hear the messages well when played.
Weight (with pillow speaker) Operating Temperature 4 to 5 Oz 50o F to 90o F *Subject to change without notice APPENDIX B. In Case of Difficulty THERE ARE NO USER-SERVICEABLE PARTS INSIDE DO NOT OPEN THE CASE OR ATTEMPT SERVICE. CONTACT ABILITY RESEARCH, INC FOR SERVICE AT (612) 939-0121 s1.No Sound out at all and the ActionVoice plays messages and prompts with the AbilitySpeaker unplugged.
2.Sound through the pillow speaker is ok but no sound through the AbilitySpeaker. Make sure there are messages recorded (prompts will only play through the pillow speaker). Make sure the connectors on the cable from the AbilitySpeaker are plugged into the proper connectors on the ActionVoice. Make sure you have an ActionVoice2A and that it is setup with OPTION 2 and AUDITORY MODE on. 3.Not Loud Enough. Turn up the volume control on the bottom of the ActionVoice.
The speaker inside will likely be damaged by water or other liquids. If liquid is accidentally spilled into the AbilitySpeaker, do not use it and contact Ability Research before using it further. NEVER carry or handle the AbilitySpeaker, ActionVoice, or pillow speaker by the cords. Hold the connector (not the cord!) when unplugging the cords. This Manual Copyright © 1997 Ability Research, Inc All Rights Reserved AbilitySpeaker™ and ActionVoice™ are trademarks of Ability Research, Inc.
ONE-YEAR LIMITED WARRANTY Ability Research, Inc. (“ARI”) warrants this product against defects in material or workmanship for a period of one year from date of purchase. If you discover a defect, ARI will repair (or replace at ARI option) the defective product at no charge (except for shipping and handling). You should retain the dated invoice as evidence of the date of purchase. This warranty does not cover any damage due to accident, misuse, abuse, misapplication, or negligence.
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions in this manual should be read be for operating the AbilitySpeaker™. 2. Retain Instructions - This manual should be retained for future reference. 3. Heed Warnings - All warnings and instructions on the AbilitySpeaker™ and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed.
9. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by Ability Research, Inc. - Unauthorized substitutions may result in fire, electric shock, or other hazards. 10.Servicing - There are no user-serviceable components in the AbilitySpeaker. Refer all servicing to qualified, Ability Research, Inc. service personnel. See Appendix B. See Limited Warranty. FOR SERVICE, CALL Ability Research, Inc.
