Operation Manual

Use Factory Restore to return all settings to the defaults, and remove all

data from the Compact Rolltalk.

Important before you begin:

 Make sure the Rolltalk is connected to its power adapter and that

the battery is fully charged (the battery indicator LED found in the

upper left corner is green).

 Connect a USB keyboard to the Rolltalk. You can use a USB mouse

for easier menu navigation, but a USB keyboard is required.

Starting Rolltalk Factory Restore:

 Power on the Rolltalk

 Once the Paceblade splash screen disappears press the F3 key on

your keyboard.

 Select the appropriate keyboard input method from the

dropdown menu and click Next.

Running Rolltalk Factory Restore:

 Select Rolltalk Factory Restore from the System Recovery

Options menu. This will bring up the Abilia Factory Recovery

program.

 Press the y key on your keyboard to proceed with the factory

restore.

 IMPORTANT: selecting Yes will restore the Rolltalk to its factory

settings and delete all data on drive C:

 Rolltalk Factory Restore will now display the progress of the

recovery process. Please do not power off or unplug the Rolltalk

while the recovery process is running.

 Once the Rolltalk Factory Restore process is done it will

automatically exit back to the System Recovery Options menu. It

might display the following error message: “The tool failed to run.

Try choosing another tool.” Please ignore this error message and

click OK.

 Click Shut down to shut down the system, it will start up with the

default factory settings the next time you power it on, or click

Restart to restart with the default factory setting immediately.