Operation Manual

To send and receive text messages requires a USB SIM card holder to be

installed on your Device.

Prior to use

The SIM card must not be a dual card. It must be a dedicated SIM card.

In addition, we also ask the user to not use Compact Rolltalk for

accessing mobile broadband together with the SIM-card GSM holder.

This may result in loading the SIM card for all charges and not the mobile

broadband.

1. The PIN code on the SIM card needs to be disabled before the USB

SIM card holder can be inserted. This can be done by placing the SIM

card in a mobile phone. See the user guide provided by your mobile

phone supplier for information about this.

2. Compact Rolltalk must be switched off when the USB SIM card holder

is placed into the device.

3. Place the SIM card into the USB SIM card holder, as shown on the

pictures.

4. Pull out the card holder with a tweezer or similar item

5. Insert the SIM card into the holder. Note the angled corner.

6. Push the card holder into place, as shown on picture

7. Connect the included USB cable to the USB SIM card holder

8. Plug the other end into USB port (10 or 17) on Compact Rolltalk

9 Attach the USB SIM card holder with the included Velcro on the back

of Compact Rolltalk.

10. Turn on Compact Rolltalk and Start Rolltalk Nova.