Operation Manual

36
It is possible to connect three different types of camera to Rolltalk Nova;
Front Camera for taking pictures, Rear View Camera for looking behind
the wheelchair when driving and a Camera directed towards you, for
video communication through Skype.
 From the Main Menu, select Settings|Camera
1. Select desired Function, for the camera attached to the Device
 Take Photo, takes pictures of the surroundings.
 Rear View for showing what’s behind the Wheelchair when
driving.
 In order to use a Skype Camera, this must be configured in the
Skype application. For information on how to do this, see the
chapter Skype on page 23
2. Select the Camera, to be used for the Function
3. Select a proper Resolution, the range of the resolution depends on
what kind of quality there is on the camera. Keep in mind that when
selecting a high resolution the Device will use more memory to launch
the camera application and the system may seem slow.
4. Repeat this step for each Camera connected to the Device
5. Depending on what kind of functionality that is assigned, a camera
application will be found at the Wheelchair Page and on the Main Menu.
Set the sounds for different notification, such as Calendar Reminder,
Incoming SMS and Attention.
 From the Main Menu, select Settings|Sound
Note! When using IntelliGaze Eye Control System on Compact
Rolltalk, make sure to connect the Rear View and Skype Camera to
the
USB-inputs no. 11 on the back side of the Device. Connect the
Take Photo Camera to the USB-input on the
USB-inputs no. 17 on
the Device