Operation Manual
31
From the Main Menu, select Eye Control Settings
Turn Dwell On/Off
Change the Value of Dwell time
Select between four different Dwell Animations
Dead zone prevents the cursor to show small, vibrating
movements. Can be useful in combination with Repeat Dwell in
Windows, Web Browser and Text Editor for stabilizing the
pointer.
Remember Dwell per Field, prevents the dwell time to restart
when looking away from the field.
Repeat Dwell in Windows, Web Brower and Text Editor, enables
dwell to be active after selecting. When disabled, reactivation of
dwell is done by moving the pointer over the Rolltalk Nova
Window.
From the Main Menu, select Calibration
Select the visualization of the Status Window to be Show, Show
and Hide Automatically or Hide
Select between five different placements on screen for the Status
Window
Preform Calibration, starts the Calibration
Improve Calibration, improves the specific points that failed
during the last Calibration
Select More to access the General Settings of the Calibration
o Select which Eye(s) to use for Calibration
o Select Number of Calibration Points
o Change Calibration Point
o Select Slow Mode, when there is a need for a slower
Calibration pace and enlarged points
When desired to change from another Input Device to IntelliGaze Eye
Control System, do the following:
1. Make sure Compact Rolltalk is switched off before starting the
process.
2. Mount the IntelliGaze to the Compact Rolltalk according to the
manual provided with the equipment.
3. Connect the IntelliGaze Camera to the Compact Rolltalk trough
Firewire and USB. Please make sure to use the USB input on Compact
Rolltalk marked USB 2.0
4. Power on Compact Rolltalk; make sure the Rolltalk Nova Software is
shut down before proceeding to the next step in the process.
Note! When operating Desktop and any Windows-application with
IntelliGaze Eye Control System, the system will run default
IntelliGaze Settings. These Settings are among others Show/Hide of
Status Window and Dwell Settings.