Operation Manual

29
Rolltalk Nova can be controlled by touch, mouse input or eye control.
 From the Main Menu, select Settings|Input Device
1. From the Main Menu, select Settings|Input Device|Touch
2. Select if Visible Pointer should be enabled
3. Select if Play Sound on Selection should be enabled
4. Select More, to access Advanced Settings
 Filter Against Double-click, prevents accidental double-clicks
 Minimum Activation Time, enables the possibility to press on the
screen for a given time before making the selection
 Scanning Speed – on Wheelchair page, changes the value of the
scanning speed on the switch that is required for operating the
power wheelchair
 To change the values use the plus and minus keys. The values of
the settings are in seconds.
Mouse is selected when the system should be operated through mouse
interfaces, such as head mouse or joystick.
1. From the Main Menu, select Settings|Input Device|Mouse
2. Select if Visible Pointer should be enabled
3. Select if Play Sound on Selection should be enabled
4. Select if Dwell should be enabled, this setting will give access to
turning dwell On/Off at appropriate places in Rolltalk Nova
5. Select More, to access at Advanced Settings.
 Filter Against Double-click, prevents accidental double-clicks
 Minimum Activation Time, enables the possibility to press on the
screen for a given time before making the selection
 Scanning Speed – on Wheelchair page, changes the value of the
scanning speed on the switch that is required for operating the
power wheelchair
 To change the values use the plus and minus keys. The values of
the settings are in seconds.
Based on the selections done in the Settings menu, there will be an
application for controlling your Mouse Input Device on the Main Menu
From the Main Menu, select Mouse Settings
Note! Please do not switch to an input device that is not connected
to the unit. By doing this the system will not work proper, and you
might not be able to restore the settings by yourself.