Operation Manual

50
An A4 sheet for making notes is included with your Control
Medi.
6. Control Medi Holders
Rubber feet are mounted on the underside so that
your Control Medi can lie still on flat surfaces. Your
Control Medi can also be equipped with a clip
(accessory) which can be attached to a belt or
pocket.
As an optional accessory, there is also a holder that
fits to your Control Medi. This holder can be
assembled for mounting on to a table or attaching to
a pipe. The holder can also be mounted on a mobile
stand.
Another option is to hang your Control Medi around the neck. A neck
strap is supplied with your Control Medi.
Do as follows to attach the neck strap:
1. Unscrew the battery lid.
2. Place the thin loop of the neck strap in the groove around the
screw mount.
3. Screw the battery lid back down.
4. Adjust the length of the neck strap.
Warning!
The string lock is a safety feature to prevent strangling. Make sure
that the ends of the neck strap can be pulled out eg. if the
transmitter gets caught on something. Never make knots in the neck
strap!
7. Backups and reinstallation
Your Control Medi can be connected to a computer in order to make a backup of the
settings and recordings of your transmitter. The backup copy can be used to reinstall the
settings and recordings onto your transmitter. Use the Control Tool USB Interface
accessory (sold separately). The software can be downloaded from Abilia’s website.
www.abilia.com. See instructions on the website.
Label