Operation Manual

48
12. Now test the learned functions on the device that is to be controlled.
Adding a GR function
For a Switch function
Press
---
+
5
2 sec
,
1
, choose the level with
---
, choose the button
X
, set the
controlled unit in Include mode,
(with a Multi Channel-receiver: press
!
, choose the channel for the receiver),
choose your desired function, continue or finish
---
2 sec
.
1
= Switch Off
2
= Switch On
3
= Switch Toggle
For a Window covering
Press
---
+
5
2 sec
,
1
, choose the level with
---
, choose the button
X
, set the
controlled unit in Include-mode, then continue or finish
---
2 sec
(with a Multi Channel-receiver: press
!
, choose the channel for the receiver),
choose your desired function, continue or finish
---
2 sec
.
1
= Close
2
= Open
3
= Stop
For a Dimmer function
Press
---
+
5
2 sec
,
1
, choose the level with
---
, choose the button
X
, set the
controlled unit in Include-mode, then continue or finish
---
2 sec
(with a Multi Channel-receiver: press
!
, choose the channel for the receiver),
choose your desired function, continue or finish
---
2 sec
.
1
= Dimmer Off
2
= Dimmer On
3
= Switch Toggle
4
= Max light
5
= Dimmer Darker
6
= Dimmer Brighter
4.2 Excluding GR unit
Do the following to remove (Exclude) an GR unit from the system:
1. First press
---
and then simultaneously press
5
for 2 seconds. When you release the
buttons the “Setting” alert sounds and the indication lamp on button 1 flashes.
2. Press
2
.
3. Set the GR unit to be removed in Exclude mode, see its manual.
4. If the GR units gets contact the “Success” alert sounds. If something goes wrong or
takes too long, the “Error” alert sounds.
Excluding a GR unit
Press
---
+
5
2 sec
,
2
, then set the GR unit in Exclude mode.
4.3 Setting the channel range
Your Control Medi has the option to set different channel ranges for the transmitter to
operate within. When the change of channel range is applied, programmed channels will
disappear and a new random code is added on the Code button
!
.