Operation Manual

42
7. Press
2
to finish the recording.
8. Select where you want the sequence to be with button
X
.
9. If the action is successful, the “Success” alert sounds. If something goes wrong or takes
too long, the “Error” alert sounds.
Creating an automatic sequence (Macro)
Press
---
+
1
2 sec
,
4
,
1
, create the sequence,
---
+
1
,
4
,
2
, select the button
X
to
be saved.
Max 25 seconds per press, 50 presses
2.13 Repeating the last function
Your Control Medi Multi can have a button that repeats the last sent function.
Do as follows to add Repeat Last Function to a selected button:
1. First press
---
and then simultaneously press
2
for 2 seconds. When you release the
buttons the “Setting” alert sounds and the indication lamp on button 2 flashes.
2. Press
5
.
3. Press
---
to choose the level.
4. Press the desired button
X
on the selected level.
5. If the action is successful, the “Success” alert sounds. If something goes wrong or takes
too long, the “Error” alert sounds.
To delete the Repeat Last Function, you will need to reset the button. See Reset to default
settings, reset a button.
Repeating the last function
Press
---
+
2
2 sec
,
5
, choose the level and button
X
.
Default setting: OFF (none)